Direct concrete answer
How much concrete for a 10 foot circular patio?
A 10 ft diameter round patio requires 0.97 cubic yards of concrete, or 44 bags of 80-lb premix before field waste. With 10% overage, order about 1.1 cubic yards.
Quick answer
| Project dimensions | 10 ft diameter x 4 in |
|---|---|
| Area or count | 79 sq ft |
| Volume | 26.18 cubic feet |
| Volume | 0.97 cubic yards |
| Metric volume | 0.74 cubic meters |
| 80-lb bags needed | 44 bags |
| 60-lb bags needed | 59 bags |
| 50-lb bags needed | 70 bags |
| Ready-mix order with 10% overage | 1.1 cubic yards |
| Ready-mix planning cost at $150/yd3 | $160 |
| Bagged planning cost at $5/80-lb bag | $220 |
Calculation steps
- Find radius: 10 ft diameter / 2 = 5.00 ft radius.
- Calculate circular area: 3.1416 x 5.00 x 5.00 = 78.54 sq ft.
- Calculate volume: 78.54 sq ft x 0.333 ft = 26.18 ft3.
- Convert to cubic yards: 26.18 ft3 / 27 = 0.97 yd3.
- Add waste for ordering: 0.97 yd3 x 1.10 = 1.1 yd3. Round according to the supplier's ordering increment.
This is the exact math behind the answer, but the field order should reflect the actual formed dimensions, the base condition, and the supplier's minimum order policy. For a circular slab, measure diameter across the finished form. A small radius error repeats around the whole edge.
Number of bags by size
Bag counts use common premix yields and round up to whole bags. Always check the yield printed on the exact product before buying because specialty mixes can differ.
| Bag size | Common yield | Calculation | Bags to buy |
|---|---|---|---|
| 80-lb bag | 0.6 ft3 | 26.18 / 0.6 | 44 |
| 60-lb bag | 0.45 ft3 | 26.18 / 0.45 | 59 |
| 50-lb bag | 0.375 ft3 | 26.18 / 0.375 | 70 |
Cost snapshot
At a planning price of $150 per cubic yard, the waste-adjusted ready-mix concrete is about $160 before short-load, delivery, pump, labor, forms, base stone, reinforcement, tax, or finish upgrades. The 80-lb bag material estimate is about $220 before mixer rental or labor.
Cost is where small concrete jobs surprise people. A short-load fee can make the delivered price look high, while bagged concrete can look cheap until the crew has to mix 44 heavy bags fast enough to place and finish one continuous surface. Use the material number as a quote starting point, not as the final installed price.
Ready-mix vs bagged concrete
Round patios often have more edging waste than square slabs, so keep the overage rather than ordering the exact cylinder volume.
As a rule of thumb, ready-mix becomes easier once a project is near or above one cubic yard. This page's base volume is 0.97 cubic yards, so the practical choice depends on access, crew size, weather, finish timing, and whether the supplier charges a short-load fee. If the pour must be continuous, the truck often reduces risk even when the invoice includes a delivery charge.
Recommended PSI and reinforcement
| Use | Typical planning PSI | Notes |
|---|---|---|
| Patio or walkway | 3,000 PSI | Light foot traffic on compacted base. |
| Garage floor | 3,500 PSI | Verify vapor barrier, joints, and reinforcement. |
| Driveway | 3,500 to 4,000 PSI | Use higher strength for trucks, RVs, or weak soil. |
| Footings | 3,000 to 4,000 PSI | Plan and local code control final mix. |
Use 3,000 PSI for many patios and upgrade if the slab carries a hot tub, outdoor kitchen, or vehicle load.
Use reinforcement, fiber, or mesh based on patio size, soil, and cracking-control preference. Keep reinforcement supported within the slab thickness.
Project-specific notes
This answer is for a 10 ft diameter round patio. The geometry is straightforward, but the site details decide whether the estimate is clean in the field. Before ordering, compare the calculated dimensions against the actual form layout, the base depth, and the planned finish elevation.
- A round patio is easiest to estimate by diameter, but forms and edging waste can be higher than a square slab.
- Use a center stake and radius line to check the formed circle before ordering.
- If the project includes thickened edges, a landing, a flare, a step, or a separate footing, calculate that concrete separately and add it to the base result.
Common mistakes
- Using radius when the formula expects diameter, or diameter when the formula expects radius.
- Ignoring extra waste from curved forms and edge finishing.
- Connecting a walkway or step landing to the patio without adding that separate volume.
The expensive mistake is running short during placement. The second most expensive mistake is ordering more concrete than the site can place before it starts setting. The best order is not the smallest number; it is the number that fits the measured work, the crew, the truck access, and the supplier's rounding policy.
What to say when ordering
I am estimating a 10 ft diameter round patio. My calculated volume is 0.97 cubic yards, and I want to plan around 1.1 cubic yards with 10% overage. Can you confirm the order size, mix strength, short-load fee, delivery charge, chute reach, and whether this job needs a pump or different placement method?
Related calculations
Sources and methodology
BuilderCalc uses standard geometric volume formulas, the 27 cubic feet per cubic yard conversion, common premix bag yields, and planning cost ranges that should be verified with local suppliers.